{"title":"Adapters","description":"\u003ch2\u003eAdapters \u0026amp; Modules\u003c\/h2\u003e\u003cp\u003eUSB-to-CAN\/CAN-FD adapters, a USB-HID-to-UART bridge, a 100 W PoE receiver and POS protocol adapters (MDB, O.P.I., Wi-Fi): interface hardware for motion control, embedded systems and payment terminals.\u003c\/p\u003e","products":[{"product_id":"akrocan-fd-usb-to-can","title":"AkroCAN-FD — Universal USB-to-CAN\/CAN-FD Adapter for Akrodyn Devices","description":"\u003cp class=\"ak-lead\"\u003eThe official interface adapter for the entire Akrodyn ecosystem: universal for CAN and CAN-FD, required for commissioning, control and diagnostics of all Akrodyn devices, plug-and-play on Windows, macOS and Linux.\u003c\/p\u003e\u003cp\u003eTo commission, configure or diagnose an Akrodyn device, you need the AkroCAN-FD. The adapter is the direct connection between your PC and all Akrodyn products with a CAN interface: servo drives (Rigi, Pilatus, Grimsel), brake choppers, sensor systems and further CAN-capable modules.\u003c\/p\u003e\u003cp\u003eThe \u003cstrong\u003eAkrodyn Motion and Sensor Suite\u003c\/strong\u003e uses this connection for graphical parameterisation, live data visualisation, firmware updates (DFU) and system diagnostics in real time. Thanks to a galvanically isolated CAN interface and native socketCAN support under Linux, the AkroCAN-FD is simultaneously a fully capable universal CAN analysis adapter for any CAN or CAN-FD bus.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eRequired adapter for all Akrodyn devices\u003c\/strong\u003e with CAN interface (servo drives, brake choppers, sensor systems)\u003c\/li\u003e\u003cli\u003eSupports \u003cstrong\u003eCAN 2.0 A\/B and CAN-FD up to 10 Mbit\/s\u003c\/strong\u003e as a universal adapter for any CAN system\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eAkrodyn Motion and Sensor Suite\u003c\/strong\u003e for graphical parameterisation, live plot and diagnostics included\u003c\/li\u003e\u003cli\u003eGalvanically isolated CAN interface to protect PC and target device\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eRJ45 and JST-PH-2.0 connector\u003c\/strong\u003e (5 V, CANH, CANL, GND)\u003c\/li\u003e\u003cli\u003e120 Ω CAN termination resistor on board\u003c\/li\u003e\u003cli\u003eNative \u003cstrong\u003esocketCAN\u003c\/strong\u003e compatibility under Linux via slcand\u003c\/li\u003e\u003cli\u003eCompatible with VESC Tool, canutils, SavvyCAN and any SLCAN\/Candlelight software\u003c\/li\u003e\u003cli\u003eNo separate driver required under macOS and Windows 10+\u003c\/li\u003e\u003cli\u003eBased on STM32G431 microcontroller\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003ctable\u003e\u003cthead\u003e\u003ctr\u003e\u003cth\u003eParameter\u003c\/th\u003e\u003cth\u003eValue\u003c\/th\u003e\u003c\/tr\u003e\u003c\/thead\u003e\u003ctbody\u003e\u003ctr\u003e\u003ctd\u003eCAN standard\u003c\/td\u003e\u003ctd\u003eCAN 2.0 A\/B and CAN-FD\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMax. bitrate\u003c\/td\u003e\u003ctd\u003e10 Mbit\/s (CAN-FD)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eIsolation\u003c\/td\u003e\u003ctd\u003eGalvanic (CAN ↔ USB)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eUSB connector\u003c\/td\u003e\u003ctd\u003eUSB-C\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eCAN connector\u003c\/td\u003e\u003ctd\u003eRJ45 + JST-PH 2.0 (4-pin)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eTermination resistor\u003c\/td\u003e\u003ctd\u003e120 Ω (on board)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eOperating systems\u003c\/td\u003e\u003ctd\u003eWindows, macOS, Linux\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eProtocol\u003c\/td\u003e\u003ctd\u003eSLCAN + Candlelight\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMicrocontroller\u003c\/td\u003e\u003ctd\u003eSTM32G431\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eTypical Applications\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eCommissioning and parameterisation of Akrodyn servo drives and brake choppers\u003c\/li\u003e\u003cli\u003eSystem diagnostics and firmware updates of all Akrodyn devices with CAN interface\u003c\/li\u003e\u003cli\u003eLive monitoring and data logging via Akrodyn Motion and Sensor Suite\u003c\/li\u003e\u003cli\u003eDevelopment and debugging of CAN-FD systems and custom CAN protocols\u003c\/li\u003e\u003cli\u003eUniversal CAN analysis adapter for any third-party systems\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eScope of Delivery\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eAkroCAN-FD adapter board\u003c\/li\u003e\u003cli\u003eUSB-C cable\u003c\/li\u003e\u003cli\u003eJST-PH connection cable\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eDownloads\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eDatasheet AkroCAN-FD\u003c\/li\u003e\u003cli\u003eAkrodyn Motion and Sensor Suite (software download)\u003c\/li\u003e\u003c\/ul\u003e","brand":"Akrodyn","offers":[{"title":"Default Title","offer_id":55016775549270,"sku":"AK-CAN-FD-1","price":89.0,"currency_code":"CHF","in_stock":true}]},{"product_id":"usb-dual-host-to-uart","title":"Dual USB Host HID Adapter","description":"\u003cp class=\"ak-lead\"\u003eTwo USB HID devices, one data stream: the Dual USB Host HID Adapter reads two USB hosts simultaneously, processes both data streams and outputs the result either as a UART stream via the JST connector or as a USB HID device via USB-C.\u003c\/p\u003e\u003cp\u003eAccess control systems, POS terminals and industrial scan stations often require multiple USB HID devices simultaneously: for example a barcode and QR code scanner, or an ID scanner and QR code driver\u0026#x27;s licence scanner. The Dual USB Host HID Adapter connects up to two such devices simultaneously, merges their data streams and outputs the result either as a UART stream via the JST connector or as a USB HID device via USB-C.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eTwo independent \u003cstrong\u003eUSB-A host ports\u003c\/strong\u003e for simultaneous operation of two HID devices\u003c\/li\u003e\u003cli\u003eMerged output data stream selectable as \u003cstrong\u003eUSB-HID via USB-C\u003c\/strong\u003e or \u003cstrong\u003eUART via JST XH 5-pin\u003c\/strong\u003e\u003c\/li\u003e\u003cli\u003eNo USB host library required in the target system\u003c\/li\u003e\u003cli\u003eCompatible with all standard USB HID devices: barcode scanners, QR code scanners, ID readers, card readers, keyboards\u003c\/li\u003e\u003cli\u003eMCU: ESP32-S3-WROOM-1U-N4, dedicated USB host controller CH559L\u003c\/li\u003e\u003cli\u003ePlug-and-play, compact, directly integrable\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eTechnical Data\u003c\/h3\u003e\u003ctable\u003e\u003cthead\u003e\u003ctr\u003e\u003cth\u003eParameter\u003c\/th\u003e\u003cth\u003eValue\u003c\/th\u003e\u003c\/tr\u003e\u003c\/thead\u003e\u003ctbody\u003e\u003ctr\u003e\u003ctd\u003eUSB Host Ports\u003c\/td\u003e\u003ctd\u003e2x USB-A\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eUSB Host Standard\u003c\/td\u003e\u003ctd\u003eUSB 1.1 \/ 2.0 HID\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eOutput USB-HID\u003c\/td\u003e\u003ctd\u003eUSB-C\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eOutput UART\u003c\/td\u003e\u003ctd\u003eJST XH 5-pin\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eUART Voltage\u003c\/td\u003e\u003ctd\u003e3.3 V\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003ePower Supply\u003c\/td\u003e\u003ctd\u003e5 V via USB-C\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMCU\u003c\/td\u003e\u003ctd\u003eESP32-S3-WROOM-1U-N4\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eUSB Host Controller\u003c\/td\u003e\u003ctd\u003eCH559L\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eTypical Applications\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eAccess control systems with combined barcode and ID reader\u003c\/li\u003e\u003cli\u003ePOS terminals with dual scanner setup\u003c\/li\u003e\u003cli\u003eIndustrial kiosk systems and vending machines\u003c\/li\u003e\u003cli\u003eEmbedded platforms without native USB host stack\u003c\/li\u003e\u003cli\u003eVehicle inspection with QR code driver\u0026#x27;s licence scanner and ID scanner\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eScope of Delivery\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eDual USB Host HID Adapter Board\u003c\/li\u003e\u003cli\u003eUSB-C cable\u003c\/li\u003e\u003cli\u003eJST XH 5-pin cable\u003c\/li\u003e\u003c\/ul\u003e","brand":"Akrodyn","offers":[{"title":"Default Title","offer_id":55016775582038,"sku":"AK-DUAL-USB-HOST-Adapter","price":69.0,"currency_code":"CHF","in_stock":true}]},{"product_id":"poe-receiver-shield-100w","title":"PoE Receiver Shield — 100 W, up to 48 VDC, CAN-configurable","description":"\u003cp class=\"ak-lead\"\u003e100 W Power over Ethernet: power supply and data over a single Ethernet cable, directly compatible with all Akrodyn servo drives.\u003c\/p\u003e\u003cp\u003ePower over Ethernet (PoE) eliminates separate power cables in distributed systems: one cable delivers data and up to 100 W of power. The Akrodyn PoE Receiver Shield receives PoE power, regulates it to the desired output voltage (configurable via CAN) and directly feeds the connected Akrodyn servo drive or other device. Ideal for decentralised robotics nodes, camera drive axes and industrial installations where cable management is critical.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003e100 W PoE input\u003c\/strong\u003e (IEEE 802.3bt compatible)\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eOutput voltage up to 48 VDC\u003c\/strong\u003e (adjustable via CAN)\u003c\/li\u003e\u003cli\u003eCAN-configurable output voltage for flexible system integration\u003c\/li\u003e\u003cli\u003eDirectly compatible with \u003cstrong\u003eall Akrodyn servo drives\u003c\/strong\u003e (PU stack)\u003c\/li\u003e\u003cli\u003eUse as a generic regulated power supply for any load\u003c\/li\u003e\u003cli\u003eProtection functions: overcurrent, overvoltage, overtemperature\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003ctable\u003e\u003cthead\u003e\u003ctr\u003e\u003cth\u003eParameter\u003c\/th\u003e\u003cth\u003eValue\u003c\/th\u003e\u003c\/tr\u003e\u003c\/thead\u003e\u003ctbody\u003e\u003ctr\u003e\u003ctd\u003ePoE standard\u003c\/td\u003e\u003ctd\u003eIEEE 802.3bt (PoE++)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMax. input power\u003c\/td\u003e\u003ctd\u003e100 W\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eOutput voltage\u003c\/td\u003e\u003ctd\u003eup to 48 VDC (CAN-configurable)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eInterface\u003c\/td\u003e\u003ctd\u003eCAN\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eTypical Applications\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eDecentralised servo axes in robotics and automation\u003c\/li\u003e\u003cli\u003eCamera and sensor pan-tilt units\u003c\/li\u003e\u003cli\u003eIndustrial installations with Ethernet infrastructure\u003c\/li\u003e\u003cli\u003eLean wiring harness architectures\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eScope of Delivery\u003c\/h3\u003e\u003cul\u003e\u003cli\u003ePoE Receiver Shield\u003c\/li\u003e\u003cli\u003eJST connection cable\u003c\/li\u003e\u003c\/ul\u003e","brand":"Akrodyn","offers":[{"title":"Default Title","offer_id":55016776073558,"sku":"AK-POE-100","price":99.0,"currency_code":"CHF","in_stock":true}]},{"product_id":"akrocan-usb-can-adapter","title":"AkroCAN -- USB-to-CAN Adapter for Akrodyn Devices","description":"\u003cp class=\"ak-lead\"\u003eThe compact entry-level adapter for CAN systems: plug-and-play on Windows, macOS and Linux, natively compatible with socketCAN, VESC Tool and the Akrodyn Motion and Sensor Suite.\u003c\/p\u003e\u003cp\u003eAnyone who wants to commission, parameterise or diagnose Akrodyn devices with a CAN interface needs a reliable USB-to-CAN adapter. The AkroCAN connects your PC directly to the CAN bus of all Akrodyn products: servo drives (Rigi, Pilatus, Grimsel), brake choppers, sensor systems and further CAN-capable modules.\u003c\/p\u003e\u003cp\u003eThe \u003cstrong\u003eAkrodyn Motion and Sensor Suite\u003c\/strong\u003e uses this connection for graphical parameterisation, live data visualisation, firmware updates (DFU) and system diagnostics in real time. Thanks to native socketCAN support under Linux, the AkroCAN is simultaneously a universal CAN analysis adapter for any CAN 2.0 bus.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eCompatible with all Akrodyn devices\u003c\/strong\u003e with CAN interface (servo drives, brake choppers, sensor systems)\u003c\/li\u003e\u003cli\u003eSupports \u003cstrong\u003eCAN 2.0 A\/B\u003c\/strong\u003e up to 1 Mbit\/s\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eAkrodyn Motion and Sensor Suite\u003c\/strong\u003e for graphical parameterisation, live plot and diagnostics included\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eJST-PH-2.0 connector\u003c\/strong\u003e (5 V, CANH, CANL, GND)\u003c\/li\u003e\u003cli\u003e120 Ohm CAN termination resistor on board\u003c\/li\u003e\u003cli\u003eNative \u003cstrong\u003esocketCAN\u003c\/strong\u003e compatibility under Linux via slcand\u003c\/li\u003e\u003cli\u003eCompatible with VESC Tool, canutils, SavvyCAN and any SLCAN\/Candlelight software\u003c\/li\u003e\u003cli\u003eNo separate driver required under macOS and Windows 10+\u003c\/li\u003e\u003cli\u003eBased on STM32F072 microcontroller with Candlelight firmware\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003ctable\u003e\u003cthead\u003e\u003ctr\u003e\u003cth\u003eParameter\u003c\/th\u003e\u003cth\u003eValue\u003c\/th\u003e\u003c\/tr\u003e\u003c\/thead\u003e\u003ctbody\u003e\u003ctr\u003e\u003ctd\u003eCAN standard\u003c\/td\u003e\u003ctd\u003eCAN 2.0 A\/B\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMax. bitrate\u003c\/td\u003e\u003ctd\u003e1 Mbit\/s\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eIsolation\u003c\/td\u003e\u003ctd\u003eNone\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eUSB connector\u003c\/td\u003e\u003ctd\u003eUSB-C\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eCAN connector\u003c\/td\u003e\u003ctd\u003eJST-PH 2.0 (4-pin)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eTermination resistor\u003c\/td\u003e\u003ctd\u003e120 Ohm (on board)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eOperating systems\u003c\/td\u003e\u003ctd\u003eWindows, macOS, Linux\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eProtocol\u003c\/td\u003e\u003ctd\u003eSLCAN + Candlelight\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMicrocontroller\u003c\/td\u003e\u003ctd\u003eSTM32F072\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eTypical Applications\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eCommissioning and parameterisation of Akrodyn servo drives and brake choppers\u003c\/li\u003e\u003cli\u003eSystem diagnostics and firmware updates of all Akrodyn devices with CAN interface\u003c\/li\u003e\u003cli\u003eLive monitoring and data logging via Akrodyn Motion and Sensor Suite\u003c\/li\u003e\u003cli\u003eDevelopment and debugging of CAN systems and custom CAN protocols\u003c\/li\u003e\u003cli\u003eUniversal CAN analysis adapter for any CAN 2.0 systems\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eScope of Delivery\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eAkroCAN adapter board\u003c\/li\u003e\u003cli\u003eUSB-C cable\u003c\/li\u003e\u003cli\u003eJST-PH connection cable\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eDownloads\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eDatasheet AkroCAN\u003c\/li\u003e\u003c\/ul\u003e","brand":"Akrodyn","offers":[{"title":"Default Title","offer_id":55016781185366,"sku":"AK-CAN-1","price":49.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0969\/8928\/2646\/files\/SocketCAN_transparent_1.png?v=1786976507"},{"product_id":"pos-retrofit-adapter","title":"POS Retrofit Adapter","description":"\u003cp class=\"ak-lead\"\u003eConnect any payment software with any payment hardware: Akrodyn POS adapters translate between USB, MDB, OPI and Wi-Fi in both directions.\u003c\/p\u003e\u003cp\u003eThe payment infrastructure in vending machines, kiosks and checkout terminals is a patchwork of protocols: the cash register speaks USB, the payment terminal only understands OPI (Open Payment Interface), the coin validator uses MDB. Akrodyn POS adapter boards handle the complete protocol translation: timeout handling, channel management and transaction processing are fully integrated. More information at \u003cstrong\u003eakropay.ch\u003c\/strong\u003e.\u003c\/p\u003e\u003ch3\u003eAvailable Variants\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eVariant 1: USB → O.P.I. POS Adapter Board (AK-POS-USB-OPI)\u003c\/strong\u003e Connects a PC or embedded host (USB serial) with an OPI payment terminal (Ethernet). Automatically handles channel 0\/1, timeouts, payment abort and all OPI functions. Ideal for IM15 integration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVariant 2: MDB → O.P.I. POS Adapter Board (AK-POS-MDB-OPI)\u003c\/strong\u003e Translates the MDB bus (Multi-Drop Bus, vending standard) to OPI. Retrofit solution for vending machines with modern card terminals.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVariant 3: USB → MDB POS Adapter Board (AK-POS-USB-MDB)\u003c\/strong\u003e Brings USB serial control to the MDB bus, for software that does not natively speak MDB.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVariant 4: Wi-Fi → MDB Adapter Board (AK-POS-WIFI-MDB)\u003c\/strong\u003e Wireless control of the MDB bus for remote management or cloud connectivity of vending machines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVariant 5: Wi-Fi → O.P.I. POS Adapter Board (AK-POS-WIFI-OPI)\u003c\/strong\u003e Wireless connection of an OPI payment terminal: no Ethernet cable required, full OPI functionality.\u003c\/p\u003e\u003ch3\u003eGeneral Features\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eComplete OPI protocol implementation (XML-based, all functions)\u003c\/li\u003e\u003cli\u003eAutomatic channel management (CH0\/CH1)\u003c\/li\u003e\u003cli\u003eTimeout handling and payment abort\u003c\/li\u003e\u003cli\u003eMDB-compatible (vending industry standard)\u003c\/li\u003e\u003cli\u003eCustomisable: further protocols (GPIO, UART, CAN) on request\u003c\/li\u003e\u003cli\u003eMore information: \u003cstrong\u003eakropay.ch\u003c\/strong\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eTypical Applications\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eIM15 card terminal integration\u003c\/li\u003e\u003cli\u003eVending machine modernisation\u003c\/li\u003e\u003cli\u003eUnattended payment terminals (kiosk, coin machine, tanning studio)\u003c\/li\u003e\u003cli\u003eSelf-checkout and point of sale\u003c\/li\u003e\u003c\/ul\u003e","brand":"Akrodyn","offers":[{"title":"USB → O.P.I.","offer_id":55169095598422,"sku":"AK-POS-USB-OPI","price":79.0,"currency_code":"CHF","in_stock":true},{"title":"MDB → O.P.I.","offer_id":55169095631190,"sku":"AK-POS-MDB-OPI","price":79.0,"currency_code":"CHF","in_stock":true},{"title":"USB → MDB","offer_id":55169095663958,"sku":"AK-POS-USB-MDB","price":79.0,"currency_code":"CHF","in_stock":true},{"title":"Wi-Fi → MDB","offer_id":55169095696726,"sku":"AK-POS-WIFI-MDB","price":79.0,"currency_code":"CHF","in_stock":true},{"title":"Wi-Fi → O.P.I.","offer_id":55169095729494,"sku":"AK-POS-WIFI-OPI","price":79.0,"currency_code":"CHF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0969\/8928\/2646\/files\/0_PoS_Adapter_97714aca-ffe9-464e-915d-6a5bf777072a.png?v=1788251327"}],"url":"https:\/\/checkout.akrodyn.com\/en\/collections\/adapter-module.oembed","provider":"Akrodyn Shop","version":"1.0","type":"link"}